I was recently tasked with changing the Master Key at a client site that had a pair of Palo Alto firewalls arranged in an active/passive HA pair. Unfortunately the Palo Alto documentation I consulted neglected to mention a rather important step and I ended up snotting the passive firewall. This post details the correct procedure for changing the Master Key on an active/passive HA pair of Palo Alto firewalls.

Read More Changing the Master Key on a Palo Alto Firewall Active/Passive HA pair

There is a lot of literature available on configuring VXLANs using MP-BGP EVPN but they tend to focus on large multi pod service provider type topologies with lots of moving parts. This post covers a very simple DCI configuration for a two site topology using ingress replication and a collapsed leaf and spine.

Read More DCI using VXLAN with MP-BGP EVPN and Ingress Replication on a Nexus 9K

I don’t really have much operational experience with NX-OS so was very happy to recently discover that Cisco has a freely downloadable virtual version of the Nexus 9000 software. Though the setup process was fairly straight forward there were a few gotchas so this post will detail the process I used to deploy the NX-OSv 9000 into my home ESXi based lab.

Read More Installing and Configuring the NX-OSv 9000 in ESXi

A site I work with uses PRTG for infrastructure monitoring and Zerto as part of the DR strategy. Unfortunately there are no native PRTG sensors available for monitoring Zerto. This custom script can be used to create a sensor that will indicate the existence of any errors and warnings for the Zerto Virtual Appliances, Virtual Protection Groups, and the Virtual Manager.

Read More Monitoring Zerto with PRTG

A few years ago I was working on a project where we had to provide a reliable and high quality free to air broadcast signal to 70 TV’s for the Melbourne Cup. It ended up being quite complex with lots of AV and IT integration work being done however the important part of getting the signal to the TV’s reliably was done using MuMuDVB. This post will cover how to install and configure MuMuDVB on a Raspberry Pi 3.

Read More Streaming DVB-T over an IP network using MuMuDVB on a Raspberry Pi 3

I have worked on a variety of projects where a Raspberry Pi was the perfect hardware platform to host various services. They are very cheap, easy to configure, and there is a vast array of add on hardware available. This post will cover a basic installation of Ubuntu MATE 16.04.2 LTS onto a Raspberry Pi 3.

Read More Installing Ubuntu MATE 16.04.2 LTS on a Raspberry Pi 3

I like to use Raspberry Pis for a lot of my projects. Something I like to do is disable Bluetooth and WiFi as these are not generally things that I run on a server. There are probably a variety of ways to achieve this but this is how I do it.

Read More Disabling WiFi and Bluetooth on a Raspberry Pi 3 running Ubuntu Mate 16.04.2 LTS